OEM Carrier Condenser Fan Motor HC39GE237 — 1/4 HP 230V for Model PH10JA036000ABAA

This is the genuine OEM Carrier condenser fan motor (part number HC39GE237), the factory-specified replacement for the Carrier PH10JA036000ABAA heat pump condenser unit. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, dissipating heat from the refrigerant and keeping the compressor within safe operating temperatures. When this motor fails, the outdoor fan stops spinning — causing the system to overheat, trigger high-pressure lockout, and shut down entirely. Common failure symptoms include the unit running briefly then cutting off, the fan blade not turning despite power at the unit, or audible bearing noise from the outdoor cabinet.

• Specs: 1/4 HP | 208-230V, 1-Phase, 60Hz | 1100 RPM | Frame 48Y | 5 5/8" diameter | 1.5" shaft extension | CW rotation (lead end) | 3-wire | Requires 5 MFD / 370V run capacitor (sold separately)
• OEM vs Generic: This is a genuine Carrier OEM motor wound and balanced to factory tolerances. Generic aftermarket motors often deviate in RPM and starting torque, causing premature bearing failure or compressor strain. OEM ensures exact airflow performance and longevity.
• Install difficulty: 3/5 — Disconnect power at the disconnect box before beginning. Tools needed: 1/4" and 5/16" nut drivers, needle-nose pliers, adjustable wrench, fan blade puller (strongly recommended), multimeter. Photograph all wiring before disconnecting. Note shaft orientation before removing the old motor — CW rotation must be maintained.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Designed as the factory-matched replacement for Carrier PH10JA036000ABAA condenser units. Also replaces cross-reference part numbers HC39GE237A, HC39GE236A, HC39GE234A, HC39GE232A, HC37GE232, HC39GE231, and GE/Genteq model 5KCP39EGS070S. Always verify HP, voltage, RPM, rotation, and frame size against your unit's motor nameplate before ordering. Our parts specialists are available to confirm fitment — contact us before you buy.