OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PH10JA03000GAGAA

This is the factory OEM condenser fan motor for the Carrier PH10JA03000GAGAA packaged heat pump unit, supplied under primary part number HC39GE237 (also cross-references as HC40GE232). The condenser fan motor draws ambient air across the outdoor coil to reject heat during cooling and absorb heat during heating. When this motor fails, the outdoor unit may overheat and trip the high-pressure limit, causing the system to short-cycle, lock out entirely, or run with significantly reduced capacity — leaving you with warm air inside on the hottest days or no heat on the coldest nights.

• Specs: 1/4 HP | 208-230V, 1-Phase, 60 Hz | 1100 RPM | Frame 48Y | CW Rotation (CWLE) | 1.40 Amp | Shaft: 1.5" extension | 3-wire lead | Requires 5 MFD / 370V run capacitor (sold separately)
• OEM vs. Generic: This is a genuine Carrier OEM motor wound to factory tolerances. Generic aftermarket motors frequently deviate in amp draw, RPM, and rotation direction, risking compressor damage from insufficient heat rejection and voiding the system warranty.
• Install Difficulty: 3/5 — Disconnect and lock out power before opening the condenser cabinet. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, needle-nose pliers, multimeter. Always photograph wiring and blade pitch before disassembly. Note blade rotation direction and re-set blade pitch to OEM spec on reassembly.
• Warranty: 1-year OEM factory warranty against defects in materials and workmanship. Ships same business day from our warehouse when ordered before 3 PM local time.

Compatibility: Direct OEM replacement for Carrier PH10JA03000GAGAA packaged heat pump units. Also replaces legacy part numbers HC39GE237A, HC39GE236A, HC39GE234A, HC39GE232A, HC37GE232, HC39GE231, and GE/Genteq model 5KCP39FGS071S. Verify voltage, HP, RPM, and rotation on your unit's motor data plate before ordering. Our fitment team is standing by to confirm compatibility — contact us before you order if you have any doubt.