OEM Carrier Dual Run Capacitor for PH10JA030000AGAA Package Unit

The run capacitor is the energy-storage component that keeps your PH10JA030000AGAA package unit's compressor and condenser fan motor spinning efficiently. It delivers the steady phase-shifted current both motors need to run after start-up. When a run capacitor weakens or fails, you'll notice the most common HVAC symptoms: a low humming from the outdoor unit that won't start, a condenser fan that hesitates or has to be spun by hand, hard-starting compressors, short-cycling, warm air from the registers, and in some cases a tripped breaker as the motors draw locked-rotor amperage. This is a dual run capacitor rated in microfarads (MFD/µF) for both the HERM (compressor) and FAN terminals at 370 or 440 VAC. Genuine OEM capacitors hold a tight ±5% tolerance and use 10,000-hour, 105°C-rated metallized-film construction so capacitance stays stable through summer heat. Always match the exact MFD rating stamped on your old capacitor's label. Why OEM matters here: cheap aftermarket capacitors often ship with ±10–15% tolerance and lower temperature ratings. A capacitor even 10% off its MFD spec forces the compressor windings to run hot, shortening compressor life by years and risking a far more expensive failure. The few dollars saved on a generic part are not worth a burned-out compressor. Installation difficulty: 2 of 5. Tools: 1/4" and 5/16" nut drivers, insulated needle-nose pliers, and a multimeter with capacitance mode. SAFETY — a charged capacitor can deliver a dangerous shock even with power off: kill the disconnect/breaker and discharge the capacitor across its terminals with an insulated resistor or screwdriver before touching the wires, and photograph the wiring first. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH10JA030000AGAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.