OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH10JA030000AEAA

This genuine OEM Carrier condenser fan motor (part HC39GE237, also superseding HC40GE232) is the factory-specified replacement for the Carrier PH10JA030000AEAA packaged heat pump unit. The condenser fan motor draws air across the outdoor coil to reject heat during cooling mode and absorb heat during heating mode. When this motor fails, you'll typically experience a system that runs but won't cool or heat, trips on high-pressure lockout, or shuts down entirely due to compressor overtemperature — symptoms that escalate fast in peak-season heat.

• Specs: 1/4 HP | 208-230V, 60Hz, 1-Phase | 1,100 RPM | Frame 48Y (5 5/8" diameter) | Clockwise rotation (CW) | 1.40 Amp | 3-wire leads with spade connectors | Requires separate 5 MFD / 370V run capacitor
• OEM vs Generic: OEM motors are wound and balanced to Carrier's exact factory tolerance for the PH10JA030000AEAA — ensuring correct airflow CFM, amperage draw, and bearing life. Generic motors routinely deviate in shaft length or rotation direction, risking premature failure and compressor damage.
• Install difficulty: 3/5 — Requires disconnecting power at disconnect and breaker, removing the top panel or fan grille, pulling the fan blade (blade puller strongly recommended), and transferring wiring. Tools needed: 5/16" and 3/8" nut drivers, needle-nose pliers, multimeter, fan blade puller, torque wrench. Always photograph wiring before disconnecting.
• Warranty: 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse when ordered before 3 PM local time.

Compatibility: Confirmed OEM fit for Carrier model PH10JA030000AEAA packaged heat pump. Also replaces cross-reference part numbers HC40GE232, HC39GE237A, HC39GE236A, HC39GE234A, HC39GE232A, HC37GE232, HC39GE231, and GE Genteq model 5KCP39EGS070S. Verify HP, voltage, RPM, and rotation on your unit's motor data plate before ordering. Our fitment team is available to confirm compatibility before you buy.