OEM Carrier Condenser Fan Motor HC31GE232 / HC40GE232 for Model PH10JA02400GAGAA

This is the genuine OEM factory-specified condenser fan motor for the Carrier PH10JA02400GAGAA packaged heat pump unit. Manufactured by GE for Carrier, this motor drives the condenser fan blade to pull air across the outdoor coil, rejecting heat in cooling mode and absorbing it in heating mode. When this motor fails, the unit will typically overheat and trip on high-pressure lockout within minutes of startup — or the condenser fan will simply not spin while the compressor runs, risking catastrophic compressor damage.

• Specs: 1/12 HP | 208-230V | 1-Phase | 60 Hz | 0.5A | 1100 RPM | 1/2" shaft diameter | 1.5" shaft length | Frame 39 | Replaces HC31GE232, HC31GE232A, HC31GE231, HC32GE230 | Also cross-references HC40GE232
• OEM vs Generic: This is the exact GE-manufactured motor Carrier ships from the factory. Generic aftermarket motors frequently use lower-grade windings and bearings that run hotter, have shorter rated lifespans, and may void remaining equipment warranties. OEM ensures correct rotation direction, RPM, and shaft spec without guesswork.
• Install difficulty: 3/5 — Disconnect and lock out power before beginning. Tools needed: 5/16" and 1/4" nut drivers, adjustable wrench, multimeter, wire nuts or terminal connectors. Always photograph existing wiring before disconnecting. Discharge any run capacitor before touching terminals. Verify fan blade set-screw torque after reassembly.
• Warranty: 1-year OEM factory warranty backed by Carrier's Replacement Parts program. Orders placed by 3 PM ship same business day from our warehouse.

Compatibility: Engineered for Carrier model PH10JA02400GAGAA packaged heat pump units. Cross-references OEM part numbers HC31GE232, HC31GE232A, HC31GE231, HC32GE230, and HC40GE232. Always confirm horsepower, voltage, RPM, and shaft diameter against your unit's data plate before ordering. Our fitment team is available to verify compatibility — contact us before you order if you have any questions.