OEM Carrier Condenser Fan Motor 1/12 HP 1100 RPM 208-230V for Model PH10JA01800GAEAA

This is the genuine OEM factory-specified condenser fan motor for the Carrier PH10JA01800GAEAA packaged unit. The condenser fan motor drives the outdoor fan blade that exhausts heat from the refrigerant coil. When it fails, the system loses the ability to reject heat — leading to high-pressure lockout, compressor overheating, or a complete no-cool condition. Common failure symptoms include a humming outdoor unit with a non-spinning fan, intermittent shutdowns on hot days, or a fan blade that spins freely by hand but won't run under power.

• Specs: 1/12 HP | 1100 RPM | 208-230V | 60 Hz | 0.5A | 1-Phase | Frame 39 | Shaft Diameter 0.5" | Shaft Length 1.5" | Clockwise rotation (shaft up) | GE/Genteq 5KCP39BGS162S
• OEM vs Generic: This OEM unit is wound and balanced to Carrier's exact factory tolerances. Generic replacements often deviate in shaft length, rotation direction, or amperage draw — risking premature compressor failure from inadequate heat rejection. Always verify the data plate before installing any motor.
• Install Difficulty: 3/5 — Disconnect power and discharge the run capacitor before beginning. Tools needed: 1/4" and 5/16" nut drivers, needle-nose pliers, multimeter, and wire stripper. Always photograph existing wiring before disconnecting. It is strongly recommended to replace the run capacitor at the same time — a weak capacitor is a leading cause of motor burnout and repeat failures.
• Warranty: 1-year OEM factory warranty. Orders placed before cutoff ship same business day from our warehouse.

Compatibility: Designed for Carrier model PH10JA01800GAEAA packaged units. Also replaces HC31GE232A, HC31GE231, HC32GE230, HC31GE230, and HC31GE230A. Verify horsepower, RPM, voltage, shaft diameter, and rotation direction on your unit's data plate before ordering. Our parts team is available to confirm fitment — reach out before you order if you have any questions.