OEM Carrier Condenser Fan Motor HC31GE232 1/12 HP 208-230V for Model PH10JA018000AEAA

This is the genuine OEM factory-specified condenser fan motor for the Carrier PH10JA018000AEAA heat pump. The condenser fan motor drives the outdoor unit's fan blade, pulling air across the condenser coil to reject heat from the refrigerant. When this motor fails, the outdoor fan stops spinning — causing the system to overheat, trip the high-pressure limit, and shut down entirely. Common failure symptoms include the compressor running with no fan movement, the unit cutting out after a few minutes of operation, or the motor humming but not turning.

• Specs: 1/12 HP | 1100 RPM | 208-230V | 0.5A | 1-Phase | 60 Hz | Frame 39 | Shaft Diameter: 0.5" | Shaft Length: 1.5" | GE/Genteq model 5KCP39BGS162S
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part — wound to exact factory tolerances for the PH10JA018000AEAA. Generic replacements often deviate in shaft length, rotation direction, or amp draw, risking premature failure or capacitor damage.
• Install difficulty: 3/5 — Requires disconnecting 240V power at the breaker and discharging the run capacitor before any work. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, multimeter, and needle-nose pliers. Always photograph wiring connections before removal. Pro tip: replace the run capacitor at the same time — a degraded capacitor is a leading cause of motor burnout.
• Warranty: Covered by Carrier's OEM replacement warranty. Ships same business day from our warehouse when ordered before 3 PM local time.

Compatibility: Direct OEM replacement for Carrier model PH10JA018000AEAA heat pump. Also replaces superseded Carrier part numbers HC31GE232A, HC31GE231, HC32GE230, HC31GE230, and HC31GE230A. Verify horsepower, voltage, and shaft specs against your unit's data plate before ordering. Our fitment team is available to confirm compatibility — contact us before you order.