OEM Carrier Condenser Fan Motor HC31GE232 1/12 HP 1100 RPM 208-230V for Model PH10JA018000ADAA

This is the factory OEM replacement condenser fan motor for the Carrier PH10JA018000ADAA packaged unit. The condenser fan motor drives the outdoor fan blade to expel heat from the refrigerant coil. When this motor fails, the unit loses the ability to reject heat — leading to rapid high-pressure trips, compressor overheating, and full system lockout. Common failure symptoms include the outdoor fan not spinning, the unit shutting off shortly after startup, or a loud buzzing noise with no blade movement.

• Specs: 1/12 HP | 1100 RPM | 208-230V | 0.5A | Single-phase | 60 Hz | Frame 39 | Shaft diameter 0.5" | Shaft length 1.5" | OEM Part # HC31GE232
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part built to exact factory tolerances for the PH10JA018000ADAA. Generic motors often deviate in RPM, shaft sizing, and thermal protection ratings — risking premature failure and compressor damage. OEM is always the safer long-term choice.
• Install Difficulty: 3/5 — Requires disconnecting 240V power at the breaker before accessing the condenser section. Tools needed: nut driver set, needle-nose pliers, wire stripper, multimeter. Always note blade pitch and rotation direction (typically counter-clockwise viewed from shaft end) before removing the old motor. Inspect and replace the run capacitor at the same time — a failing capacitor is a leading cause of motor burnout.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Engineered as the direct OEM replacement for Carrier model PH10JA018000ADAA. Also replaces HC31GE232A, HC31GE231, and HC32GE230. Always verify horsepower, voltage, RPM, and shaft specs against your unit's data plate before ordering. Need help confirming fitment? Our HVAC parts specialists verify compatibility before you buy — no guesswork required.