OEM Carrier Gas Furnace Flame Sensor Rod for PG9YAA036080ABSS

The flame sensor is a single metal rod positioned in the burner flame that tells the control board ignition has truly taken place. Your Carrier PG9YAA036080ABSS relies on flame rectification — a small DC micro-amp current conducted through the live flame — to confirm the burners are lit before it keeps the gas valve open. Over time the rod gets coated with oxide and carbon, the signal weakens, and the board loses sight of the flame. The telltale symptom is short-cycling: the burners ignite for a few seconds, then shut off, and the furnace retries, usually locking out after 3–5 failed tries. Homeowners report the furnace lighting and quitting over and over, intermittent no-heat on cold mornings, and a flashing error code on the board. Specs: This is a single-rod flame-rectification sensor with a high-temperature stainless/Kanthal sensing element and a ceramic insulator built for continuous burner exposure. A clean, healthy sensor generates roughly 1–6 microamps of DC flame current; readings under about 0.5 µA typically trigger a flame-sense lockout. The mounting bracket and spade terminal follow Carrier/Bryant 9-series geometry so the rod seats at the proper depth and angle. OEM vs Generic: Flame sensing is a precise, low-current job. OEM sensors use the right alloy and rod length so the micro-amp signal reads where the board expects. Generic rods often use cheaper metal that oxidizes quickly and sits at the wrong depth, producing weak or unstable flame current and nuisance lockouts within a season. Install: Difficulty 1/5. Tools: 1/4" nut driver, fine emery cloth, and a multimeter set to DC microamps. Safety: switch the furnace off at the breaker AND shut the gas valve before removing the burner-compartment sensor. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG9YAA036080ABSS. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.