OEM Carrier Motor Run Capacitor for Gas Furnace PG9YAA036080ABSS

The run capacitor is the small energy-storage can that gives your unit's blower motor — and on packaged equipment the condenser fan and compressor — the phase shift it needs to start and keep spinning. It holds a charge and releases it to the motor windings on every run cycle. When a capacitor weakens or fails, you'll notice the motor humming but not turning, a fan that needs a push to start, intermittent no-heat or no-cool calls, frequent breaker trips, or a hard clicking as the motor tries and fails to start. A bulging or leaking top is a sure sign it's done. Specs: this is an OEM-spec motor run capacitor rated to the exact microfarad (MFD/µF) and voltage your PG9YAA unit requires — typically a 370V or 440V can. OEM capacitors hold a tight ±5% tolerance, so the motor sees the design current it was engineered for and runs at the correct temperature. Why OEM matters: cheap aftermarket capacitors commonly run ±10–15% tolerance and use lower-temperature dielectric film. A capacitor even 10% low on MFD forces the motor to draw extra amperage and run hot, shortening winding life; too high stresses the windings the other way. Wrong capacitance is one of the top causes of premature blower and compressor failure. The OEM part is matched and rated for continuous duty inside a hot furnace cabinet. Install difficulty: 2/5. Tools: 1/4" nut driver, insulated screwdriver, and a multimeter with a capacitance setting. SAFETY — discharge the capacitor before touching the terminals: a charged run capacitor can deliver a painful, dangerous shock even with power off. Kill the breaker first, then bleed each terminal across an insulated screwdriver or 20k resistor. Ships same business day from our stocked warehouse on orders before 3 PM CST. 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG9YAA036080ABSS. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.