OEM Carrier Hot Surface Igniter for Gas Furnace PG9YAA036060ABSS

The hot surface igniter is the component that lights your furnace's gas burners on every heat call. A 120V signal drives it white-hot (roughly 2,000°F) so the gas valve can open onto a hot element and establish flame. When the igniter cracks or weakens, you get no heat: the inducer and blower run, the gas valve clicks, but the burners never light — and after three failed attempts the Carrier control board enters lockout, shutting the furnace down for an hour before retrying. Telltale signs are a weak orange glow rather than bright white, visible cracks in the element, and short-cycling on the coldest mornings. This is a silicon nitride hot surface igniter, the flat element Carrier uses across the PG9YAA 90%+ gas furnace line. Silicon nitride runs cooler, draws less amperage, and endures far more on/off cycles than the fragile silicon carbide igniters fitted to older equipment. Cold resistance typically measures 11–13 ohms on a multimeter; an open (infinite) reading confirms the element is dead. Why OEM matters here: aftermarket universal igniters often swap in silicon carbide or a mismatched resistance, drawing the wrong current, glowing unevenly, and cracking within a season or two. An igniter that can't reach full temperature won't reliably prove flame and causes repeat nuisance lockouts. The exact-fit OEM part mounts in the factory bracket with the correct connector — no splicing required. Install difficulty: 2/5. Tools: 1/4" nut driver and a multimeter. SAFETY: turn off the gas and kill power at the breaker before servicing; never touch the ceramic element with bare fingers — skin oil leaves hot spots that crack it. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG9YAA036060ABSS. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.