OEM Carrier Gas Valve EF32CB192 — 24V Natural Gas Replacement for Model PG9YAA036060ABSS

This is the OEM-specified combination gas valve for the Carrier PG9YAA036060ABSS packaged gas furnace. The gas valve is the gatekeeper of your furnace's heat: it receives the 24V signal from the control board and opens to allow natural gas flow to the burners during each ignition cycle. When this valve fails, the furnace will attempt ignition — you may hear the inducer start and the igniter glow — but gas will not flow, resulting in a lockout condition, repeated no-heat calls, or a unit that simply won't fire at all. Replacing it with a factory-matched OEM part restores safe, reliable operation and avoids the pressure-regulation drift that can occur with off-spec aftermarket valves.

• Specs: OEM Part # EF32CB192 | 24V coil voltage | 1/2" inlet × 1/2" outlet | Single-stage, fast-opening | Natural gas | Factory-set pressure regulator | Replaces legacy part numbers VR8205S2874 and 20058601
• OEM vs Generic: OEM gas valves are factory-calibrated to the exact manifold pressure spec for the PG9YAA036060ABSS burner assembly. Generic valves can ship with inconsistent regulator settings, leading to improper combustion, nuisance lockouts, and potential safety code violations. Always confirm with your local gas utility before substituting.
• Install difficulty: 3/5 — This is a gas-carrying component. Shut off the gas supply at the upstream service valve before beginning. Tools needed: adjustable wrench, pipe thread sealant (gas-rated), multimeter, manometer for post-install pressure verification. Always leak-test with approved solution after installation. We strongly recommend licensed HVAC technician installation.
• Warranty: 1-year OEM manufacturer warranty. In-stock unit ships same business day from our warehouse.

Compatibility: Factory-direct replacement for Carrier PG9YAA036060ABSS packaged gas furnaces. Also fits multiple PG9YAA and 359AAV series units — see compatibility note below. Verify your existing valve's inlet/outlet size and coil voltage on the unit data plate before ordering. Our fitment team is available to confirm compatibility before you buy.