OEM Carrier Hot Surface Igniter for PG9MXA036060AASA Furnace

The hot surface igniter is the component that lights the burner gas at the start of every heating cycle. On a call for heat, the control board energizes the igniter until it glows bright orange, then opens the gas valve so the burners ignite. When the igniter fails, the most common symptom is no heat: you'll hear the draft inducer spin up and the gas valve click, but the burners never light, and after two or three tries the furnace locks out — often with the blower pushing cold air and the control board flashing an ignition-fault or lockout code. A cracked or aged element may glow weak and uneven instead of bright, causing delayed or rough ignition. Specifications: This OEM igniter uses a silicon nitride element rated for 120V hot-surface operation, reaching roughly 2,000°F within seconds. Unlike older brittle silicon carbide igniters, silicon nitride resists thermal shock and rough handling. A healthy element reads a low resistance on a multimeter (typically in the tens of ohms); an open/OL reading confirms a cracked, failed element. Why OEM matters: Carrier matches igniter resistance and warm-up current to the control board's ignition timing. Generic silicon carbide replacements often have the wrong resistance and won't reach full temperature in the allotted window, producing delayed ignition, flame rollout, sooting, and short igniter life. The OEM part stays inside Carrier's proving sequence. Installation difficulty: 2 of 5. Tools: 1/4" nut driver and a multimeter. #1 safety warning: turn off both gas and electrical power before servicing, and never touch the element with bare fingers — skin oils create hot spots that crack the igniter prematurely. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG9MXA036060AASA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.