OEM Carrier Gas Furnace Flame Sensor Rod for PG9MAB060120AASA

The flame sensor is the safety device that confirms a flame is actually present inside your Carrier PG9MAB060120AASA furnace. Using flame rectification, the rod passes a tiny microamp current through the flame back to the control board; if that signal disappears, the board shuts the gas valve within seconds to prevent raw gas from building up. When the sensor gets coated with oxide or carbon — or the rod cracks — the furnace lights, runs for 3 to 7 seconds, then shuts off and tries again. This classic short-cycle, often ending in a hard lockout with the LED flashing a flame-failure code, is the number-one symptom homeowners report on this platform. This is a single-rod kanthal flame sensing electrode with a porcelain insulator, sized and bent to seat correctly in the PG9MAB burner assembly. A healthy sensor reads roughly 1.5 to 6 microamps of flame current; anything under about 0.7 µA will drop out and cause lockouts. Why OEM matters: the rod length, bend angle, and insulator rating determine where the tip sits in the flame envelope. Generic sensors with the wrong geometry or a lower-grade insulator sit in a cooler part of the flame, generate weak current, and fail prematurely — sending you back into the same short-cycling you were trying to fix. Install difficulty: 1 of 5. Tools needed: 1/4" nut driver and fine emery cloth (never sandpaper) to dress the rod. #1 safety warning: turn off the gas at the unit shutoff and kill the furnace breaker before reaching into the burner compartment. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG9MAB060120AASA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.