OEM Carrier Hot Surface Igniter for PG9MAB060100AASA Gas Furnace

The hot surface igniter is the component that lights the burner gas on your Carrier PG9MAB060100AASA package gas furnace. On every call for heat the control board sends 120V to the igniter, which glows white-hot (roughly 2,000°F) and ignites the gas. When the element cracks or weakens, the classic symptom is no heat: the inducer spins up, you hear the gas valve click, but the burners never light and the furnace locks out after three or four ignition attempts. Homeowners typically notice repeated clicking, short-cycling, or a blast of cold air right before the unit shuts down. This is a silicon carbide hot surface igniter with a nominal cold resistance in the 40–75 ohm range — verify yours with a multimeter, as an open (infinite) reading confirms a failed element. Silicon carbide is brittle and degrades a little with every heat cycle, which is why it is the most frequently replaced ignition part on 90%+ furnaces. Igniter resistance matters: an out-of-spec element won't reach ignition temperature fast enough, causing delayed ignition (a small "whump" that stresses the heat exchanger) or simply never glowing hot enough to fire. OEM igniters use the correct silicon carbide grade and a precise ceramic mount so the element sits at the exact burner gap. Generic igniters often run wider tolerances and thinner elements that crack within a single season. Install difficulty: 2/5. Tools needed: 1/4" nut driver and a multimeter to confirm resistance. Safety: TURN OFF the gas supply and kill power at the furnace switch or breaker before servicing. Handle the new igniter only by its ceramic base — skin oils on the element create hot spots and cause early failure. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG9MAB060100AASA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.