OEM Carrier Gas Valve EF32CW211 / EF660015 — 24V 1/2" 3.5" WC for Model PG9MAB048100ACSA

This OEM combination gas valve is the factory-specified replacement for the Carrier PG9MAB048100ACSA gas furnace. Manufactured by White Rodgers (model 36J24-510), this valve controls the flow of natural gas from the supply line to the burner assembly. When it fails, the furnace will typically lock out with a no-heat fault, fail to establish a flame after ignition, or exhibit intermittent heating with the burner shutting off prematurely. A faulty gas valve is one of the most definitive no-heat diagnoses — when your igniter glows but no flame appears, this part is the prime suspect.

• Specs: 24V coil voltage | 1/2" NPT inlet & outlet | Pressure regulator factory-set to 3.5" W.C. | Single-stage, slow-opening | Includes LP conversion kit | White Rodgers 36J24-510
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part. OEM valves are calibrated and pressure-tested to exact factory tolerances. Aftermarket valves may have inconsistent seat sealing and regulator drift, increasing the risk of nuisance lockouts or unsafe operation.
• Install difficulty: 3/5 — Gas work requires care. Always shut off the gas supply and verify zero pressure before disconnecting. Tools needed: adjustable wrench, pipe thread sealant (gas-rated), flathead and Phillips screwdrivers, manometer (to verify outlet pressure post-install). Installation by a licensed HVAC technician is strongly recommended.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Engineered for Carrier model PG9MAB048100ACSA. OEM part number EF32CW211 has been superseded by Carrier's updated replacement kit EF660015, which ships as the current factory equivalent. Always verify your unit's gas type (natural gas or LP) and inlet pressure before installation. Have a question about fitment? Our parts specialists verify compatibility before you order — reach out before you buy.