OEM Carrier Gas Valve 24V 1/2" Natural Gas for Model PG9MAB036060ABSA

This is the factory-authorized OEM combination gas valve for the Carrier PG9MAB036060ABSA gas furnace, cross-referenced under part number EF32CW211 and its current superseding part EF660015 (White Rodgers 36J24-510). The gas valve is the heart of the furnace's fuel delivery system — it receives the 24V signal from the control board after the igniter reaches operating temperature and the pressure switch proves inducer operation, then opens to allow metered gas flow to the burners. When this valve fails, the furnace will complete its pre-ignition sequence but no gas will flow, resulting in a hard lockout, a "no heat" condition, or repeated ignition attempts with no flame establishment.

• Specs: 24V AC coil | 1/2" inlet × 1/2" outlet, straight-through | Natural gas (3.5" W.C. factory set) | Includes LP conversion kit | Slow-opening single-stage design | White Rodgers 36J24-510 platform
• OEM vs Generic: OEM valves are factory-calibrated to the exact outlet pressure and flow rate specified for the PG9MAB036060ABSA heat exchanger. Aftermarket valves risk mis-calibrated outlet pressure, leading to incomplete combustion, nuisance lockouts, or cracked heat exchangers over time.
• Install difficulty: 3/5 — Gas work requires a licensed technician in most jurisdictions. Tools needed: adjustable wrench, pipe thread sealant (gas-rated), manometer for outlet pressure verification, and leak-detection solution. Always shut off the manual gas cock and verify zero pressure before disconnecting the valve. Confirm outlet pressure at 3.5" W.C. after installation.
• Warranty: 1-year OEM manufacturer warranty. In-stock and ships same business day from our warehouse.

Compatibility: Designed for Carrier model PG9MAB036060ABSA gas furnace. OEM part number EF32CW211 has been superseded by EF660015; both are fulfilled as the current production valve. Also fits select Bryant and Payne furnaces sharing the 36J24-510 valve platform — verify your unit's data plate gas type (natural gas) and inlet/outlet sizing before ordering. Our fitment team is available to confirm compatibility before you buy.