OEM Carrier Furnace Gas Valve EF32CW211 — 24V 1/2" Natural Gas for Model PG9MAB036040ACSA

This OEM combination gas valve is the factory-authorized replacement for the Carrier PG9MAB036040ACSA gas furnace. Manufactured by White Rodgers (model 36J24-510), this valve acts as the primary gatekeeper of gas flow to your furnace's burners. It receives a 24V signal from the control board and opens to allow precisely regulated natural gas through to the burner assembly. When it fails — whether from a stuck solenoid, failed operator, or internal seat wear — the result is a complete no-heat condition: the inducer runs, the igniter glows, but gas never flows, triggering a safety lockout after 3 failed ignition attempts.

• Specs: 24V AC coil | 1/2" NPT inlet & outlet | Natural gas rated | Pressure regulator factory set to 3.5" W.C. | Single-stage slow-opening | White Rodgers 36J24-510 cross-reference | Includes LP conversion kit
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part — the exact same valve installed on the assembly line. OEM valves are leak-tested and flow-calibrated at the factory. Aftermarket valves can vary in regulator set-point accuracy, leading to delayed ignition, rough starts, or nuisance lockouts.
• Install difficulty: 3/5 — Gas work requires caution. Shut off the manual gas valve and 120V power before beginning. Tools needed: 1/2" and 3/4" open-end wrenches, pipe thread sealant (gas-rated), flathead screwdriver, manometer (to verify outlet pressure after install). Always leak-test all fittings with approved gas leak detection solution before restoring power. Licensed technician installation strongly recommended.
• Warranty & Shipping: 1-year OEM manufacturer warranty. In stock — ships same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier model PG9MAB036040ACSA furnace. Also cross-references White Rodgers 36J24-510, and supersedes earlier Carrier part numbers EF32CW207 and related EF32CW series valves. Current authorized replacement is EF660015. Verify your existing valve's inlet size (1/2" NPT) and coil voltage (24V) against your unit's data plate before ordering. Questions about fitment? Our HVAC parts specialists verify compatibility before you buy — contact us today.