OEM Carrier Furnace Gas Valve for PG9MAB024060ACSA Package Unit

The gas valve meters fuel to the burners on every heat cycle. On the Carrier PG9MAB024060ACSA it opens on command from the control board once the inducer and igniter are proven, delivers a regulated manifold pressure to the burners, then closes tightly when the call ends. When it fails you get no heat despite a working igniter and inducer — the igniter glows but the burners never light. A sticking or leaking valve produces delayed-ignition whumps, inconsistent flame, or a faint gas odor, while a chattering or buzzing coil signals the solenoid is on its way out. This is a redundant 24V gas valve with two safety solenoids in series and an integral pressure regulator, configured for natural gas with an LP conversion kit available. It is set for the PG9 manifold pressure, typically about 3.5 in. W.C. on natural gas, and matches the valve body, inlet and outlet sizing, and electrical terminals of the original. A gas valve is a life-safety component — it must seat fully and regulate precisely. OEM valves hold factory regulator calibration and redundant-seat tolerances; off-brand valves can drift on outlet pressure, over- or under-firing the furnace, or seat slowly, risking unburned gas and delayed ignition. This is not the part to economize on. Install difficulty: 3 of 5. Tools: two pipe wrenches, pipe thread sealant, a manometer, a multimeter, and leak-detection solution. #1 safety warning: shut off the manual gas supply AND kill electrical power before removing the valve, then leak-test every joint with soap solution before relighting. Confirm manifold pressure with a manometer after installation. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG9MAB024060ACSA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.