Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
OEM Carrier Run Capacitor for PG9MAA060140ACKA Packaged Furnace
Carrier

OEM Carrier Run Capacitor for PG9MAA060140ACKA Packaged Furnace

SKU: CARRIE-PG9MAA060140ACKA-CAPACITOR-HC91PD001 Brand: Carrier
Guaranteed to fit Furnace — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

OEM Carrier Run Capacitor for PG9MAA060140ACKA Packaged Furnace

The run capacitor in your Carrier PG9MAA060140ACKA packaged unit gives the blower and condenser fan/compressor motors the steady phase shift they need to both start and keep spinning under load. When it weakens, the most common symptom is a motor that hums but won't start, a blower or outdoor fan that spins slowly or stalls, hard starting, intermittent no-cool on the hottest days, or a breaker that trips when the unit calls. A bulging, swollen, or oil-leaking top is a sure sign the can has failed. Run capacitors are rated in microfarads (MFD/µF) and voltage, typically 370V or 440V. Genuine Carrier capacitors are held to a tight ±5% tolerance and built for continuous duty at the unit's listed rating. Match the MFD exactly to the value stamped on your old can; voltage rating may be equal or higher but never lower. OEM matters here because a generic capacitor advertised with ±10–15% tolerance can read 'in spec' on a meter yet deliver the wrong phase angle, overheating the motor windings and silently shortening compressor and blower life. Cheaper aftermarket cans also use lower-grade dielectric film that dries out fast in rooftop and attic heat, leading to repeat failures. Install difficulty: 2 of 5. Tools needed: 1/4-inch nut driver, insulated flat screwdriver, and a multimeter with a capacitance setting. #1 safety warning: ALWAYS discharge the capacitor across its terminals with an insulated screwdriver before touching it — a stored charge can deliver a dangerous shock even with the breaker off. Kill the disconnect first, then verify zero voltage. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG9MAA060140ACKA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $99
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Capacitor fit my Carrier PG9MAA060140ACKA Packaged Furnace?
Yes. This is the factory-specified OEM capacitor for the Carrier PG9MAA060140ACKA Packaged Furnace. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the capacitor on my Carrier PG9MAA060140ACKA Packaged Furnace?
Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.
My AC hums but won’t start. What part do I need?
An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).
Is this capacitor compatible with Bryant or Payne too?
Many Carrier parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Carrier capacitor?
OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online