OEM Carrier Furnace Hot Surface Igniter for PG9MAA060080AEKA

The hot surface igniter is what lights the burners on your Carrier PG9MAA packaged gas furnace. On each call for heat the control board sends 120V to the igniter, heating it to roughly 2,000°F so it can light the gas as the valve opens. Because it cycles to that temperature every single ignition, the igniter is the most common wear part in the heating sequence. When it fails you'll notice no heat despite the inducer and blower running, a furnace that clicks and tries repeatedly before locking out, or a cold unit after a power blip. A cracked or aged igniter often glows weakly — or not at all — and the furnace gives up after three or four failed attempts. This OEM igniter uses a silicon nitride element, which is far more durable and impact-resistant than older silicon carbide igniters and resists the cracking and hot-spotting that shorten service life. It carries the correct cold resistance (typically 40–75 ohms) and 120V rating matched to the PG9MAA control board's warm-up timing, and it ships with the OEM mounting bracket and gasket for a drop-in fit. OEM matters here because the board times gas-valve opening to this igniter's specific warm-up curve. Generic igniters with the wrong resistance won't reach ignition temperature within the board's timing window, causing delayed ignition, rough lights, or repeated lockouts — and brittle aftermarket elements crack from ordinary handling and thermal cycling. Install difficulty: 2/5. Tools needed: 1/4" nut driver and a multimeter to confirm resistance. Handle the element only by its ceramic base — skin oils create hot spots that cause early failure. SAFETY: Turn off the gas and power at the unit before servicing. Ships same business day from our stocked warehouse on orders before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG9MAA060080AEKA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.