OEM Carrier Run Capacitor for PG9MAA036080ACKA 90% Gas Furnace

The run capacitor stores and delivers the phase-shifted current that keeps the blower motor (and on some assemblies the inducer motor) spinning smoothly inside your PG9MAA036080ACKA. When it weakens or fails, you'll notice the blower humming but struggling to start, intermittent no-airflow on a heat or cool call, warm air during cooling, a buzzing or clicking near the control compartment, or the motor overheating and tripping on thermal overload. A bulged, domed, or oil-leaking top is a dead giveaway it needs replacement. Carrier run capacitors are rated by capacitance (MFD/uF) and voltage — typically 370V or 440V on residential furnace blower motors — with a microfarad value (single-value or dual-round) that must match the motor's spec plate exactly. This OEM unit holds a tight +/-5% tolerance and uses long-life metallized polypropylene film for stable performance across thousands of cycles. A capacitor running outside spec is one of the most damaging failures because the motor depends on its precise MFD. Generic aftermarket capacitors often carry +/-10-15% tolerance and thinner dielectric film, so a labeled 5 MFD generic may actually deliver 4.3 or 5.8 MFD — enough to overheat windings, stress the start circuit, and cut motor life by years. The OEM Carrier capacitor matches rated MFD and voltage exactly. Install difficulty: 2/5. Tools needed: 1/4" and 5/16" nut driver, insulated needle-nose pliers, and a multimeter with capacitance (uF) mode. #1 SAFETY WARNING: always discharge the capacitor across its terminals with an insulated resistor before touching — a charged cap holds a dangerous shock even with power off. Kill the breaker first and photograph the wiring. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG9MAA036080ACKA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.