OEM Carrier Gas Valve 24V 3.5"wc for Model PG96VTAA60080CAA (Part # EF33CW152)

This is the factory OEM combination gas valve for the Carrier PG96VTAA60080CAA 96% AFUE variable-speed gas furnace. The gas valve controls the flow of natural gas from the supply line to the furnace burners in response to a 24V signal from the control board. When it fails, the result is a complete loss of heat — the inducer may run, the igniter may glow, but no gas will flow to sustain a flame, triggering a lockout fault code. A faulty valve may also cause delayed ignition, gas odor near the unit, or erratic burner operation.

• Specs: 24V coil voltage | 3.5" W.C. outlet pressure (natural gas) | 50/60Hz | Combination valve (main + redundant shutoff) | Weight: 1.92 lbs | OEM Part #: EF33CW152
• OEM vs Generic: This is a genuine Factory Authorized Parts (FAP) OEM gas valve. OEM valves are manufactured to Carrier's exact pressure and flow specifications, preserving equipment warranty and maintaining safety agency listings. Aftermarket valves may have mismatched pressure ratings that cause improper combustion or nuisance lockouts.
• Install difficulty: 4/5 — Gas valve replacement must be performed by a licensed HVAC technician. Tools required: manifold gauge, pipe wrench, leak-check solution, 24V meter, combustion analyzer. Always shut off gas supply at the manual shutoff valve and verify zero pressure before disconnecting the valve. Re-test for leaks and verify outlet pressure after installation.
• Warranty: 1-year OEM factory warranty against defects. In-stock and ships same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier PG96VTAA60080CAA packaged gas furnace. Verify coil voltage (24V) and inlet/outlet pressure rating on your unit's data plate before ordering. This valve is rated for natural gas — confirm your application before purchase. Have a question about fitment? Our HVAC parts specialists verify compatibility before you order — contact us today.