OEM Carrier Gas Valve 24V 3.5"wc for Model PG96VTAA42060BBA (EF33CW152)

This OEM combination gas valve is the factory-specified replacement for the Carrier PG96VTAA42060BBA 96% AFUE variable-speed gas furnace. The gas valve regulates the flow of natural gas from the supply line to the burner assembly, responding to 24V signals from the integrated furnace control board to open and close on demand. When this valve fails, the furnace will attempt ignition — the hot surface igniter will glow and the inducer will run — but no gas will flow, resulting in a lockout fault, no heat, or a flashing error code on the control board. In some cases a failed valve may also cause a weak or delayed flame that triggers nuisance pressure switch or flame sensor faults.

• Specs: 24V AC coil voltage | 3.5" W.C. outlet pressure (natural gas) | 50/60 Hz | Combination redundant valve design | Part Number: EF33CW152 | Weight: 1.92 lbs
• OEM vs Generic: This is a genuine OEM Carrier Factory Authorized Part, built to exact design-life specifications. Generic aftermarket valves often lack proper redundancy certification and may not meet the pressure tolerances required for the PG96VTAA42060BBA, risking improper combustion or unsafe operation.
• Install difficulty: 4/5 — Gas valve replacement must be performed by a licensed HVAC technician. Tools required: manifold gauge set, pipe wrench, leak-detection solution, multimeter, and calibrated combustion analyzer to verify outlet pressure after installation. Always shut off the manual gas supply valve and de-energize the furnace before beginning work.
• Warranty: 1-year OEM factory warranty against defects. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Designed for the Carrier PG96VTAA42060BBA 96% AFUE packaged gas furnace. Verify your existing valve's outlet pressure rating and coil voltage from the unit data plate before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order. In stock and ships today.