OEM Carrier Integrated Control Board for PG96VTAA30040AAA Furnace

The integrated furnace control (IFC) board is the central logic board of your Carrier PG96 high-efficiency gas furnace. Every heat call runs through it: it starts the draft inducer, verifies the pressure switch, powers the hot surface igniter, opens the gas valve, reads the flame sensor to confirm ignition, and times the blower on and off — all while monitoring the limit and rollout safety chain. When it goes bad you'll see a furnace that ignores the thermostat, short-cycles, runs the blower continuously or not at all, or sits dead with the diagnostic LED blinking a lockout code. A failing flame-proving circuit shows up as repeated light-then-shutdown cycles. This genuine board includes the proper onboard relays for inducer, heating blower, cooling blower, and humidifier/EAC terminals, a self-diagnostic LED for troubleshooting, and the dip-switch and jumper positions that program blower-off delay and cooling airflow. It switches 120 VAC line power on a 24 VAC control input. Because Carrier/Bryant boards are tied to a specific model and revision, the timing and firmware must match your furnace. Why OEM matters: generic replacement boards often use under-rated relays that weld closed, wider flame-sense windows that cause nuisance lockouts, and non-matching blower timing that can overheat the heat exchanger and cut furnace life short. An OEM board duplicates Carrier's relay ratings and sequence timing precisely. Installation difficulty: 3 of 5. Tools: 1/4-inch nut driver, Phillips screwdriver, needle-nose pliers, and a multimeter. SAFETY: kill the breaker AND the furnace service switch before handling the board — 120 VAC is present at the terminals. Photograph and label all wiring before you disconnect anything. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG96VTAA30040AAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.