OEM Carrier Two-Stage Gas Valve for Performance 96 PG96VAT42060BCAA

The gas valve in your Carrier Performance 96 PG96VAT42060BCAA meters fuel to the burners and, because this is a two-stage furnace, modulates between a low-fire and high-fire rate on command from the control board. It contains the redundant safety solenoids that must both open for gas to flow, plus a regulator that holds steady manifold pressure. When a gas valve fails you may notice no ignition at all (valve never opens despite a glowing igniter), a furnace stuck on low fire that can't keep up on cold days, burners that ignite roughly or with a delayed 'poof,' or a unit that lights then drops out because manifold pressure is unstable. A buzzing valve body or gas odor near the furnace are also signs of an internal fault. This OEM two-stage valve is matched to the PG96VAT42060 input rating with the correct inlet/outlet fittings, 24V coil, and factory low/high-fire pressure regulation. The redundant solenoid design and dual pressure taps let a tech verify both stages against the rating-plate manifold pressures (typically around 1.7" W.C. low / 3.5" W.C. high on natural gas). Why OEM matters: a generic valve with a different regulator curve or single-stage logic will not deliver the correct two-stage manifold pressures, causing under-fire (weak heat, condensate problems) or over-fire (overheating, cracked heat exchanger risk). OEM guarantees the safety solenoid timing and pressure calibration the Carrier board expects. Install difficulty: 3 of 5 — gas-line work belongs to a qualified tech. Tools: pipe wrenches, manometer, leak-detection solution, 1/4" nut driver. SAFETY: shut off the manual gas cock AND the breaker before disconnecting, then leak-check every joint with the manometer before relighting. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG96VAT42060BCAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.