OEM Carrier Flame Sensor for PG95XAT60100CBAA Gas Furnace Unit

The flame sensor is the small rectification rod that sits in the burner flame and confirms to the control board that the burners actually lit. It does no heating itself — it simply passes a tiny electrical current through the flame so the furnace knows it is safe to keep the gas valve open. When the rod corrodes, cracks, or carbons over, that signal drops out: the burners light for a few seconds and then snuff out, the furnace short-cycles, you hear repeated clicking and ignition attempts, the blower runs cold, and after several failed tries the board drops into a hard lockout that leaves you with no heat at all. This is a genuine Carrier rectification flame rod with a Kanthal/stainless sensing tip and a high-temperature ceramic insulator. A healthy rod produces a steady flame-rectification (microamp) signal — typically in the 1–5 µA range — measured in series with a meter on the DC microamp scale. The mounting bracket and spade terminal are matched to the PG95XAT burner assembly so the rod seats at the correct depth in the flame envelope. Why OEM matters here: aftermarket rods are often built from lower-grade alloys that oxidize and scale far faster than factory material, so the flame current sags within a season and you get nuisance lockouts and callbacks. The OEM rod holds a clean, stable signal at the geometry Carrier designed for. Install difficulty: 1 of 5. Tools: 1/4" nut driver and a multimeter (fine emery cloth to clean, never sandpaper). #1 safety warning: shut off the gas and kill power at the breaker before removing the rod. Ships same business day from our stocked warehouse on orders before 3 PM CST. 1-year OEM warranty. 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG95XAT60100CBAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.