OEM Carrier Gas Valve for PG95XAT42060BBAA Performance 95 Furnace

The gas valve is the safety-critical component that meters fuel to the burners on your Carrier Performance 95 furnace. On a call for heat, the control board energizes the valve's 24-volt coils, opening redundant internal safety seats and delivering regulated gas to the manifold at the correct pressure. When the valve fails, the most common symptom is no heat at all — you may hear the inducer spin up and see the igniter glow, but the burners never light because gas never reaches them. A valve that sticks or leaks internally can also cause delayed ignition with a rollout 'whump,' or a furnace that runs longer than it should because it cannot modulate properly. This OEM two-stage gas valve uses redundant safety solenoids and is factory-calibrated for the Performance 95's staged operation. On natural gas it regulates manifold pressure to roughly 1.8" W.C. on low fire and about 3.5" W.C. on high fire, with a typical inlet of 7" W.C. The body, fitting sizes, and electrical terminals match the Carrier manifold so it bolts in without adapters. Why OEM matters here: a gas valve is not a place to gamble. Generic valves can have looser pressure regulation or weaker safety seats, which leads to incomplete combustion, sooting, and in the worst case unsafe gas delivery. A factory-calibrated OEM valve holds the correct manifold pressure your heat exchanger was designed around. Install difficulty: 4 of 5 — this is a gas-fitting job that requires a leak test. Tools: adjustable wrench, pipe-joint compound rated for gas, a manometer, and a soap-bubble solution. #1 safety warning: shut off the manual gas supply before disconnecting anything, and leak-test every joint with bubbles before relighting. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG95XAT42060BBAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.