OEM Carrier Hot Surface Igniter for PG95XAT36060AAAA Furnace

The hot surface igniter fires the burners every time your Carrier PG95XAT36060AAAA calls for heat. After the thermostat closes and the inducer proves the pressure switch, the control board energizes the igniter with 120V; it glows white-hot and lights the gas the instant the valve opens. Because it absorbs thousands of thermal-shock cycles, it's the most commonly replaced furnace component. Symptoms of a failed igniter: blower and inducer run but you get no heat, the furnace clicks but never lights, repeated ignition lockouts (commonly a 3- or 4-flash code), or a visibly cracked/broken element. An aged igniter that glows dim orange instead of bright white often lights late, producing a delayed 'whoomp.' This is a silicon nitride igniter — much tougher and more shock-resistant than the legacy brittle silicon carbide 'M-series' style. Expect a cold resistance in the ~40–75 ohm band on a multimeter; an open/infinite reading confirms a burned-out element. It pulls roughly 4 amps and exceeds 2,000°F at full glow. OEM matters because the igniter's resistance and warm-up rate are matched to this furnace's trial-for-ignition timing. A generic igniter with the wrong resistance won't reach ignition temperature inside the board's timing window, so the gas fails to light and the furnace locks out — despite a physical 'fit.' The OEM nitride element also shrugs off the thermal cracking that kills bargain igniters in a single heating season. Install difficulty: 2/5. Tools: 1/4" nut driver and a multimeter. SAFETY: shut OFF power at the furnace switch or breaker before servicing, and handle the new igniter by its ceramic base only — fingerprints create hot spots that crack the element. Ships same business day from our stocked warehouse on orders before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG95XAT36060AAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.