OEM Carrier Furnace Control Circuit Board for PG95XAT36060AAAA

The integrated furnace control (IFC) board is the brain of your PG95XAT36060AAAA two-stage gas furnace. It sequences the entire heating cycle — energizing the inducer, proving the pressure switch, firing the hot surface igniter, opening the gas valve, and timing blower-on and blower-off delays — while continuously watching the flame sensor and limit switches for safety faults. When the board fails you'll see telltale symptoms: the furnace ignites then short-cycles, the blower runs nonstop or never starts, the thermostat calls for heat with no response, or the onboard diagnostic LED flashes a hard-lockout code. This genuine Carrier board carries the factory relay set for the inducer motor, two-stage blower taps (heat, cool, continuous fan), and igniter circuit, plus the microprocessor with self-diagnostic LED that matches the PG95XAT platform's firmware timing and flame-sense thresholds exactly. OEM matters here more than almost any other part. Aftermarket boards frequently ship with miscalibrated ignition and blower-delay timing, undersized relay contacts that pit and weld under inductive load, and flame-rectification circuits tuned to the wrong microamp sensitivity — any of which causes nuisance lockouts or premature failure that shortens the life of the whole furnace. Installation difficulty: 3 of 5. You'll need a 1/4" nut driver, needle-nose pliers, a multimeter, and your phone to photograph every wire before removal. #1 safety warning: kill the furnace breaker before you touch the board — it carries live 120V line voltage even with the door switch open. Transfer connectors one at a time to avoid mis-wiring. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG95XAT36060AAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.