OEM Carrier Gas Furnace Flame Sensor Rod for PG95SAS60140DBAA

The flame sensor is the small rod that sits in the burner flame of your Carrier PG95SAS60140DBAA and confirms to the control board that gas is actually burning. It works by flame rectification — the flame conducts a tiny microamp DC current through the rod to ground. If the board doesn't see that current within a few seconds of opening the gas valve, it shuts the valve as a safety measure. The most common failure symptom: the furnace lights, burns for 3–7 seconds, then shuts off and tries again — short-cycling on ignition until it locks out with no heat. A coated, corroded, or cracked sensor causes exactly this. This is a single-rod flame-rectification sensor with a Kanthal/stainless probe and a ceramic insulator, mounted on a bracket keyed for this furnace's burner box. A healthy sensor reads roughly 1–6 microamps of flame current; below ~0.5 µA the board will fault. OEM matters because rod length and position determine how much flame envelops the probe. A generic sensor that sits too short or at the wrong angle produces a weak, unstable signal and chronic lockouts, while a lower-grade alloy oxidizes faster and fails again within a season. Carrier's rod is dimensioned to this burner. Install difficulty: 1 of 5. Tools: 1/4" nut driver and (optionally) a multimeter set to microamps to verify flame current. TURN OFF THE GAS and the breaker before servicing. Never sand a new sensor — install it clean. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG95SAS60140DBAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.