OEM Carrier Furnace Hot Surface Igniter for PG95SAS60120DAAA

The hot surface igniter is the heart of the ignition sequence in your Carrier PG95SAS60120DAAA gas furnace. On each call for heat, once the draft is proven the control board energizes this igniter and it glows white-hot to roughly 2,500F, lighting the burner gas the instant the valve opens. When the igniter develops hairline fractures, carbon-fouls, or cracks with age, you will notice the furnace clicking and the inducer humming but no burner flame, cold air from the registers, and repeated failed-ignition lockouts — often a three-flash code at the control board. Specs: This is a 120V hot surface igniter. Original-equipment silicon nitride elements resist thermal shock and impact far better than older silicon carbide designs, and they hold a tighter cold-resistance window — typically 11 to 19 ohms for nitride versus 40 to 75 ohms for carbide. With the power off, an ohm reading well outside that band, or an open (infinite) reading on your multimeter, confirms the element is done. The bracket and plug are keyed to drop straight into the PG95SAS burner assembly. OEM vs Generic: Igniters are unforgiving of the wrong resistance. A generic element outside the design window will not reach full glow within the board's fixed ignition-trial timing, so the gas valve closes before the burners light and the furnace locks out — even with a brand-new part installed. OEM nitride igniters also survive the repeated thermal cycling that cracks cheap aftermarket carbide elements within a season or two. Install: Difficulty 2 out of 5. Tools: 1/4-inch nut driver and a multimeter. SAFETY: shut off the gas supply and kill the furnace breaker first, and handle the new igniter only by its ceramic base — skin oils on the silicon nitride tip create hot spots that shorten its life. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG95SAS60120DAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.