OEM Carrier Flame Sensor for Gas Furnace Model PG95SAS60120DAAA

The flame sensor in your Carrier PG95SAS60120DAAA furnace is a slender metal rod that sits in the burner flame and verifies the burners actually lit after the igniter fires. It operates on the principle of flame rectification: the flame conducts a minute microamp current to ground, and the control board reads that current as proof of a stable flame. If the rod becomes coated with oxidation or carbon, cracks, or shifts out of the flame, the board loses that signal and immediately closes the gas valve as a safety measure. The classic homeowner symptom is short-cycling — burners light for a few seconds, then drop out, and the furnace repeats the attempt several times before locking out and leaving you with no heat. This OEM sensor uses a high-temperature Kanthal/stainless flame rod with a porcelain insulator dimensioned to position the rod correctly in the PG95 burner flame, delivering the clean 1-6 microamp signal the Carrier board expects. Why OEM matters: cheaper aftermarket sensors use thinner rods and lesser insulators that oxidize quickly and produce a weak, drifting signal. That marginal current leads to intermittent, hard-to-diagnose lockouts. The genuine Carrier rod holds a strong, stable signal far longer for reliable operation. Install difficulty: 2 of 5. Tools: 1/4" nut driver, fine emery cloth, and a multimeter for microamp verification. #1 safety warning: turn off the gas supply and shut off power at the breaker before reaching into the burner area. Handle the new rod by its porcelain base only — never sand a fresh sensor. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG95SAS60120DAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.