OEM Carrier Gas Furnace Pressure Switch for PG95SAS60100CAAA

On your Carrier PG95SAS60100CAAA furnace, the pressure switch is the venting safety check that must pass before ignition can ever begin. As the draft inducer ramps up it pulls a vacuum on this switch and snaps its contacts closed; the control board reads that closure as proof the flue is clear and only then allows the igniter and gas valve to energize. A switch that fails open, sticks, or has a condensate-clogged sensing hose leaves the furnace humming from the inducer with no heat, locking out and short-cycling through repeated attempts and a pressure-switch fault code. A switch stuck closed is the dangerous failure, since it can let burners fire against a blocked vent. Specs: This is a negative-pressure vacuum switch rated in inches of water column, with normally-open contacts that close on draft. Carrier furnaces in this family run set points in the rough range of -0.40 to -1.00 in. w.c. Verify it with a manometer on the inducer port and a multimeter for continuity across the terminals. Single-stage and two-stage switches are not interchangeable — match both the set point and the stage count stamped on the original body. OEM vs Generic: This is a listed safety device, not a throwaway switch. A generic part with a different trip point may refuse to close on adequate draft, causing nuisance no-heat lockouts, or close too readily and permit burner operation during a partial vent restriction — exactly what the switch is meant to stop. OEM switches keep their calibrated set point across thousands of cycles. Install: Difficulty 2 out of 5. Tools: 1/4-inch nut driver and a multimeter. SAFETY: shut off the gas supply and kill the furnace breaker before servicing, and reseat the sensing hose on the correct port with no kinks or sags that can trap condensate. Ships same business day from our stocked warehouse on orders before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG95SAS60100CAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.