OEM Carrier Gas Furnace Hot Surface Igniter for PG95SAS60080CAAA

The hot surface igniter is the component that actually lights your Carrier PG95SAS60080CAAA furnace. When a heat call comes in, the control board energizes this element, which glows red-hot in seconds; gas then sweeps across it and ignites. If the igniter cracks or its element wears out, you'll hear the inducer run and the gas valve click open but see no flame — the furnace tries, retries, and finally locks out. Homeowners typically report cold air from the vents, repeated start-up attempts, and no heat, most often on the first deep freeze when the furnace runs nearly nonstop. Specs: this hot surface igniter is built to Carrier's ignition specification. Older silicon carbide elements read roughly 40–90 ohms cold and are fragile; newer silicon nitride elements tolerate thermal cycling far better and last longer. Either way, the resistance and mounting must match so the tip reaches full ignition temperature within the board's timing window. An infinite/open ohm reading means the element has cracked and failed. OEM matters because an igniter is defined by its resistance and element placement. A generic igniter with the wrong resistance won't glow hot enough to ignite gas reliably, causing delayed ignition, soft lockouts, and the harsh 'whoomp' of delayed ignition that stresses the heat exchanger. Install difficulty: 2 of 5. Tools: 1/4" nut driver and a multimeter to verify resistance. Critical: never touch the element with bare fingers — skin oils create hot spots that shatter it. #1 safety warning: shut off the gas and cut power at the furnace switch or breaker before servicing. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG95SAS60080CAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.