OEM Carrier Gas Valve for PG95ESAA42060BAA 95% AFUE Gas Furnace

The gas valve is the metering and safety heart of your Carrier PG95ESAA42060BAA furnace, opening on each heat call to feed the burners the precise amount of gas the control board demands. When it fails, the furnace produces no heat even though the inducer spins up and the igniter glows: the burners simply never light, the board locks out after three attempts, and you may hear repeated solenoid clicking. A partially sticking valve shows up as delayed ignition and a noticeable 'whump' at light-off. This 60,000 BTU furnace uses a redundant 24V two-stage gas valve — dual safety solenoids, an integral regulator, and 1/2" NPT inlet/outlet. Natural-gas manifold pressure runs about 1.7" W.C. on low fire and 3.5" W.C. on high fire (LP conversion kits change these), and the slow-opening design limits ignition flares. Why OEM: Carrier calibrates both stage pressures at the factory for this exact gas train. Aftermarket universal valves usually need both stages dialed in by hand and often ship with a single generic regulator spring — wrong manifold pressure overfires the burners and soots the heat exchanger, or underfires and starves output. The redundant-coil safety circuit is also tested to OEM tolerances. Install difficulty: 3 of 5. Tools needed: two pipe wrenches, an adjustable wrench, gas-rated pipe sealant, a manometer for both manifold pressures, and a multimeter to verify 24V at the coils. #1 safety warning: SHUT OFF THE MAIN GAS SUPPLY and the breaker before disconnecting anything, and leak-test every joint with soap solution before you relight the furnace. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG95ESAA42060BAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.