OEM Carrier Hot Surface Igniter for PG92SBS66100CAAA Gas Furnace

The hot surface igniter is the component that lights the gas at the burners every time your PG92SBS66100CAAA calls for heat. When the furnace starts, the control board sends 120 VAC to the igniter, which glows white-hot and ignites the burner gas. When it fails you'll hear the inducer spin and the gas valve click but get no heat, watch the furnace make several ignition attempts that end in a hard lockout (commonly three tries, then a flashing LED), feel cold air from the vents, or notice short-cycling as it keeps trying to relight. A cracked or worn igniter is the single most common no-heat failure on modern gas furnaces. Carrier's factory igniter for the 92-series uses a durable silicon nitride element instead of the brittle silicon carbide used in older designs, so it resists thermal shock and cracking for much longer service life. A healthy igniter reads roughly 40-75 ohms cold across the terminals; an open (infinite) reading or a visibly cracked element confirms replacement. It runs on 120 VAC and seats in the original ceramic block with the OEM bracket geometry so it sits the correct distance from the burner. Igniter resistance and geometry are matched to the control board's ignition timing. Aftermarket igniters with the wrong resistance may not glow hot enough to light gas inside the control's ignition window — causing nuisance lockouts — or draw too much current and burn out early, and cheap silicon carbide replacements crack from the same thermal cycling that retired your original. The OEM silicon nitride part restores the exact glow profile Carrier engineered. Install difficulty: 2/5. Tools: 1/4" nut driver and a multimeter for the resistance check. SAFETY: shut off the gas and kill power at the furnace switch before servicing, and handle the new element by the ceramic base only — skin oils create hot spots that shorten its life. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG92SBS66100CAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.