OEM Carrier Gas Valve 1/2" NPT 3.5" WC 24V Single Stage for Model PG92SBS60080CBAA

This is the OEM factory-specified combination gas valve for the Carrier PG92SBS60080CBAA 92% AFUE single-stage gas furnace. Manufactured by White Rodgers (model 36J52-510) and sold under Carrier part number EF32CW213, this valve controls the flow of natural gas to the main burners. When this valve fails, the furnace will attempt ignition but produce no flame — resulting in a hard lockout, an error code on the control board, or simply no heat output. A faulty gas valve may also cause the furnace to shut off immediately after ignition, intermittent heating, or a complete no-heat condition.

• Specs: 1/2" NPT inlet/outlet | 3.5" W.C. outlet pressure | 24V coil voltage | Single-stage (on/off) | Natural gas; includes LP conversion kit | White Rodgers cross-reference: 36J52-510
• OEM vs Generic: This is a genuine OEM Carrier/White Rodgers valve built to exact factory pressure and flow specifications. Aftermarket gas valves may not meet the precise outlet pressure rating (3.5" W.C.) required by the PG92SBS60080CBAA heat exchanger, risking incomplete combustion or nuisance lockouts.
• Install difficulty: 3/5 — Gas valve replacement requires shutting off the gas supply, depressurizing the line, disconnecting the wiring harness, and applying pipe-thread sealant to all fittings. Tools needed: adjustable wrench, pipe-thread compound or yellow PTFE tape, manometer (for outlet pressure verification), and a combustible gas leak detector. Always verify outlet pressure after installation. Recommended for experienced DIYers or licensed HVAC technicians.
• Warranty: 1-year OEM factory warranty against defects. Ships same business day from our warehouse when ordered before 3PM local time.

Compatibility: Direct OEM replacement for Carrier model PG92SBS60080CBAA 92% AFUE packaged gas furnace. OEM part number EF32CW213 (White Rodgers 36J52-510). Also cross-references ICP/Heil/Tempstar part number 1184393. Confirm your unit's gas type (natural gas) and inlet pressure before ordering — an LP conversion kit is included. Questions about fitment? Our HVAC parts specialists verify compatibility before you order.