OEM Carrier Hot Surface Igniter for Gas Furnace PG92SBS60080CAAA

The hot surface igniter is the component that lights your furnace's main burners on every call for heat. High-voltage current passes through the ceramic element, heating it past 1,800°F so it can ignite the gas as it leaves the manifold. When the igniter fails or cracks, the most common symptom is a furnace that runs its inducer and blower but never produces heat. You may also hear repeated clicking or short-cycling as the control tries to light, fails, and locks out, or notice intermittent firing followed by cold air. A worn igniter is the single most frequent cause of no-heat calls on the Carrier PG92 series. This is a genuine OEM silicon nitride hot surface igniter. Silicon nitride elements are far more durable than the older silicon carbide style — they resist cracking from thermal cycling and tolerate drafts and moisture far better, which is why Carrier specs them on the PG92 platform. Expect a cold resistance reading in the roughly 40–75 ohm range on your multimeter; an open (infinite) reading or any visible crack means it must be replaced. Generic aftermarket igniters often substitute cheaper carbide elements or have loosely controlled resistance. An igniter with the wrong resistance won't reach ignition temperature reliably, causing nuisance lockouts, delayed-ignition 'whoomp' events, and premature failure. The OEM part is matched to the control board's exact current curve. Install difficulty: 2 of 5. Tools needed: 1/4" nut driver, Phillips screwdriver, and a multimeter to confirm the diagnosis. #1 safety warning: shut off the gas supply and kill power at the breaker before servicing, and never touch the ceramic element with bare fingers — skin oil creates hot spots that crack it on the first cycle. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG92SBS60080CAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.