OEM Carrier Combination Gas Valve EF32CW213 for Model PG92SBS48060BAAA

This OEM combination gas valve (part number EF32CW213) is the factory-specified replacement for the Carrier PG92SBS48060BAAA 92% AFUE single-stage gas furnace. The gas valve is the central control component for fuel delivery — it opens on command from the control board to allow gas flow to the burners following a successful ignition sequence. When it fails, the furnace will typically attempt ignition, fail to establish flame, and enter a lockout fault. Common symptoms include no heat, a flashing fault code on the control board, or a furnace that runs the inducer and igniter but never lights.

• Specs: OEM Carrier combination gas valve | Matched to PG92SBS48060BAAA 4-ton, 60,000 BTU/hr furnace | 24V coil actuator | Factory-calibrated inlet/outlet pressure settings
• OEM vs Generic: This is a genuine OEM part built to Carrier's exact factory specifications. Generic or aftermarket gas valves may differ in pressure regulation tolerances, coil voltage response, and port sizing — all of which can cause improper combustion, nuisance lockouts, or unsafe operation. OEM is strongly recommended for gas-carrying components.
• Install difficulty: 4/5 — Gas valve replacement must be performed by a licensed HVAC technician. Work involves shutting off the gas supply, depressurizing the line, disconnecting wiring harness and gas fittings, and verifying for leaks post-installation with a manometer and leak detection solution. Tools needed: adjustable wrench, leak detector, multimeter, manometer.
• Warranty: 1-year OEM factory warranty against defects. Ships same business day from our warehouse.

Compatibility: Engineered for the Carrier PG92SBS48060BAAA packaged gas furnace. Always verify the part number on your existing valve's label before ordering. Our fitment team is available to confirm compatibility prior to purchase — same-day shipping available on all in-stock orders.