OEM Carrier Gas Valve 1/2" Natural Gas 24V for Model PG92SAS42060BAAA (Part# EF32CW213)

This is the factory-specified OEM combination gas valve for the Carrier PG92SAS42060BAAA packaged gas furnace. The gas valve is a 24VAC low-voltage controlled component that regulates natural gas flow into the burner assembly. When it receives a signal from the control board after the inducer and pressure switch circuits are proven, it opens to allow gas flow for ignition. A failed gas valve results in no gas flow to the burners, causing a complete no-heat lockout condition — typically after a successful ignition attempt with no flame establishment, or before any ignition sequence begins at all.

• Specs: 1/2" NPT inlet & outlet | 24VAC coil voltage | 3.5" W.C. natural gas outlet pressure | Pressure regulator adjustment range: 2.5"–5.0" W.C. (NG) / 7.0"–12.0" (LP) | Includes LP conversion kit | Compatible with Hot Surface Ignition and Direct Spark applications
• OEM vs Generic: This OEM-spec valve meets exact Carrier factory tolerances for gas pressure regulation and valve timing. Generic valves may vary in opening speed and pressure calibration, risking improper combustion, nuisance lockouts, or warranty voidance on newer systems.
• Install difficulty: 3/5 — Gas valve replacement requires shutting off the manual gas supply, depressurizing the line, and leak-testing all connections after installation. Tools needed: adjustable wrench, pipe thread sealant (approved for gas), manometer for outlet pressure verification, and a combustible gas leak detector. Recommended for qualified HVAC technicians only.
• Warranty: 1-year OEM factory warranty against defects. In-stock units ship same business day from our warehouse.

Compatibility: Designed for the Carrier PG92SAS42060BAAA packaged gas furnace. OEM part number EF32CW213 (superseded by EF32CW151 as the current direct replacement). Always confirm your unit's data plate gas type (NG or LP) and inlet pressure before ordering. Our fitment team is available to verify compatibility before you purchase — contact us with your full model and serial number.