OEM Carrier Gas Valve 24V 3.5" WC Natural Gas 1/2" — Model PG92ESAA60080CAA

The Carrier EF32CW151 is the factory OEM combination gas valve for the Carrier PG92ESAA60080CAA 92% AFUE packaged gas furnace. This valve is the critical control component that regulates all gas flow to the burner assembly. Operating on a 24-volt control signal from the integrated furnace control board, it opens on a confirmed call for heat and closes immediately on any safety fault. When this valve fails, your furnace will typically enter a hard lockout — cycling the inducer but producing no ignition, no flame, and no heat output. A faulty gas valve may also cause intermittent heating, weak burner flame, or a complete no-heat condition with no fault code related to sensors or ignition.

• Specs: 24V coil voltage | 3.5" W.C. outlet pressure (factory set) | Natural gas | 1/2" NPT inlet | White Rodgers 36J52-580 OEM equivalent | Combination redundant safety design
• OEM vs Generic: This is a genuine Carrier factory-authorized OEM part (EF32CW151) built to exact pressure and flow tolerances. Generic gas valves often deviate in outlet pressure calibration, risking incomplete combustion, nuisance lockouts, or unsafe burner operation — not acceptable on a 92% efficiency heat exchanger system.
• Install difficulty: 3/5 — Gas valve replacement must be performed by a licensed HVAC technician or gas fitter. Required tools: adjustable wrench, pipe thread sealant (gas-rated), manometer for outlet pressure verification post-install, and leak detection solution. Always shut off the main gas supply and disconnect power before beginning. Verify 3.5" W.C. outlet pressure after installation.
• Warranty: 1-year OEM factory warranty on parts. Ships same business day from our warehouse when ordered by 3 PM local time.

Compatibility: Engineered as the direct OEM replacement for the Carrier PG92ESAA60080CAA packaged gas furnace. Cross-references: White Rodgers 36J52-580. Confirm your unit's gas type (natural gas) and inlet size (1/2") on the data plate before ordering. Our HVAC parts specialists are available to verify fitment — contact us before placing your order if you have any questions.