OEM Carrier Natural Gas Furnace Valve Assembly for PG92ESAA36060AAA

This OEM gas valve meters natural gas into the burner manifold and serves as the furnace's main safety shutoff. When the thermostat calls, the control board applies 24 volts to the valve's solenoids; the valve opens and its internal regulator maintains the rated manifold pressure (about 3.5" W.C. on natural gas). Because the PG92ESAA36060AAA is a two-stage 60,000 BTU furnace, the valve modulates between a reduced first-stage firing rate and full second-stage output. Failure signs include the igniter glowing bright but the burners never lighting (ending in lockout), rough or lifting flames, a delayed ignition 'boom,' or a furnace that will only run on low stage and can't keep up on cold nights. The OEM assembly carries both stage solenoid coils, a factory-calibrated pressure regulator, and the redundant safety seats required for the furnace's certification, along with inlet and outlet pressure tap ports. It is configured for natural gas from the factory and needs an LP conversion kit for propane service. OEM is critical for a gas valve. Its regulator is set to this furnace's specific input rating and its redundant shutoff meets the listed safety standard. Aftermarket valves often regulate loosely, and over-firing can overheat and crack the heat exchanger while under-firing causes incomplete combustion, soot, and repeated flame-sense lockouts. Install difficulty: 3 of 5. Tools: two pipe wrenches, gas-rated thread sealant, a manometer for manifold-pressure verification, and an approved leak-detection solution. Safety first — close the manual gas shutoff and disconnect furnace power before you remove the valve, then leak-test every connection before returning the unit to service. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG92ESAA36060AAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.