OEM Carrier Hot Surface Igniter Kit 332505-751 for Model PG8UAA066111ACJA

This is the factory OEM hot surface igniter replacement kit for the Carrier PG8UAA066111ACJA gas furnace. The igniter is the component responsible for heating to ignition temperature and lighting the gas burner each time your furnace calls for heat. When it fails, the furnace control board will attempt ignition, find no flame, and lock out — leaving you with a system that runs the inducer, opens the gas valve, but delivers no heat. A failed igniter is one of the most common causes of a no-heat service call in gas furnaces.

• Specs: 120V hot surface igniter kit | Includes glow plug, mounting bracket, and wiring harness | OEM Part # 332505-751 | Cross-reference: LH33ZG001 | Weight: 0.21 lbs
• OEM vs Generic: This is a genuine Carrier OEM igniter kit engineered to factory tolerances for exact fit, correct resistance, and rated cycle life. Aftermarket igniters vary widely in element composition and resistance ratings, which can cause nuisance lockouts or premature cracking of the igniter element.
• Install Difficulty: 2/5 — Power down and disconnect the furnace before beginning. Tools needed: 1/4" nut driver, flathead screwdriver, needle-nose pliers. Always allow the old igniter to cool completely before handling — the element is extremely fragile. Avoid touching the new igniter element with bare hands; oils from skin cause hot spots and premature failure.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse.

Compatibility: Designed as the direct OEM replacement for the Carrier PG8UAA066111ACJA gas furnace. Also cross-references to Bryant and Payne models sharing the LH33ZG001 igniter specification. Verify your model and existing part number against your furnace's data plate before ordering. Our team is available to confirm fitment — just reach out before you buy.