OEM Carrier Hot Surface Igniter for PG8UAA060155ABJA Furnace

The hot surface igniter is the ignition source for your Carrier PG8UAA060155ABJA gas furnace. On every heat call, the ignition control sends 120V to the igniter, which glows to roughly 2,000°F and lights the gas at the burners. When it fails, you'll see the most common gas-furnace symptom of all: no heat even though the inducer and blower run. Watch for repeated ignition lockouts (three tries then shutdown), a furnace that clicks and cycles but never lights, or an element that stays dark instead of glowing bright orange. This is a silicon nitride hot surface igniter — the durable successor to brittle silicon carbide elements. Silicon nitride resists thermal shock and physical handling far better and typically lasts several times longer than legacy carbide igniters. Cold resistance should read roughly 40–75 ohms across the terminals on a multimeter; an open (infinite) reading or a visibly cracked element confirms a dead igniter. For igniters, OEM fit matters because resistance and glow temperature are matched to the control's timing. Generic aftermarket igniters often run outside spec — too high a resistance won't glow hot enough to light gas reliably, causing delayed ignition and rollout risk, while cheaper carbide blanks crack within a season. The genuine Carrier part holds the correct resistance and mounting alignment to the burner. Install difficulty: 2 of 5. Tools: 1/4" nut driver and a multimeter. #1 safety warning: shut off the gas supply and kill power at the furnace breaker before removing the burner-compartment door, and never touch the ceramic element with bare fingers — skin oil creates hot spots that shorten its life. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG8UAA060155ABJA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.