OEM Carrier Hot Surface Igniter Kit 332505-751 for Model PG8UAA060155AAJA

This is the factory OEM hot surface igniter replacement kit for the Carrier PG8UAA060155AAJA gas furnace. The hot surface igniter is the first active component in the furnace's ignition sequence — it glows bright orange to ignite the burner gas on every heating cycle. When it fails, the furnace control board will attempt ignition, detect no flame, and enter a safety lockout, leaving you with no heat. Common symptoms include the furnace clicking on, running the inducer, but shutting down after 30–90 seconds with a fault code indicating failed ignition.

• Specs: 120V hot surface igniter | Silicon carbide element | Includes mounting bracket, wire harness, and plug connector | OEM part number 332505-751
• OEM vs Generic: This OEM kit is factory-matched to the PG8UAA060155AAJA control board's igniter proving circuit. Generic igniters may vary in resistance and warm-up time, risking nuisance lockouts or premature element failure. The OEM kit includes the correct bracket geometry and wiring connector — no adapters needed.
• Install difficulty: 2/5 — Power down and confirm zero voltage at the furnace before beginning. Tools needed: 1/4" and 5/16" nut drivers, needle-nose pliers. Do not touch the igniter element with bare hands — skin oils cause hot spots and premature cracking. Photograph wiring before disconnecting the harness.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Engineered as the direct OEM replacement for Carrier PG8UAA060155AAJA gas furnaces. Verify your existing igniter voltage (120V) and mounting configuration against your unit's data plate prior to ordering. Our fitment team is available to confirm compatibility before you buy — no guesswork, no return hassle.