OEM Carrier Hot Surface Igniter for Furnace PG8UAA060135ACJA

The hot surface igniter is the first component to fire on every call for heat in your Carrier PG8UAA gas furnace. After the inducer motor proves draft, this element energizes and glows white-hot (roughly 2,000–2,500°F) to ignite the gas as it leaves the burners. When the igniter cracks, ages, or develops hot spots, your furnace will run the inducer and blower but produce no flame — and after three or four failed attempts the control board locks out, leaving you with cold air from the registers, a furnace that short-cycles, and often a flashing diagnostic LED indicating ignition failure. This is a silicon carbide hot surface igniter rated for 120V line voltage with a typical cold resistance in the 40–90 ohm range. Silicon carbide is the OEM-spec material for this furnace platform; it reaches ignition temperature quickly and seats precisely into the original bracket so the glowing tip lands directly in the gas stream. Why OEM matters here: generic igniters frequently use out-of-spec resistance elements that either fail to glow hot enough for reliable ignition or overheat and crack within a season. Silicon carbide is brittle, and aftermarket units often use thinner, lower-rated elements that shatter from normal thermal cycling. The correct OEM resistance ensures clean, repeatable lights and protects the control board's ignition circuit. Install difficulty: 2 of 5. Tools needed: 1/4" nut driver and a flat screwdriver. #1 safety warning: SHUT OFF THE GAS SUPPLY and kill power at the breaker before servicing. Never touch the igniter element with bare fingers — skin oils create hot spots that crack the element. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG8UAA060135ACJA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.