OEM Carrier Flame Sensor for Gas Package Unit PG8UAA036111ABJA

The flame sensor (flame rod) in your Carrier PG8UAA036111ABJA package unit is the safety device that proves a flame is actually present after the burners light. It works by flame rectification — when the burner flame surrounds the rod, a tiny DC microamp current flows to the control board, telling it to keep the gas valve open. When the rod oxidizes or builds up carbon and silica, that signal weakens and the board can no longer 'see' the flame. The classic symptom: the furnace lights normally, burns for a few seconds, then shuts the gas off and the blower runs on. After three failed tries the board locks out, leaving you with no heat and a flashing fault code. Specifications: this is a single-rod flame rectification sensor with a Kanthal/stainless steel sensing rod and a ceramic insulator. A healthy flame signal typically reads in the 1–6 microamp (µA) range measured in series with the rod; below roughly 1 µA the board drops out. The rod length and mounting angle are set so the tip sits properly immersed in the burner flame. Why OEM matters here: positioning is everything for a flame rod. Generic sensors often have the wrong rod length or bend, so the tip sits at the edge of the flame and produces a weak, drifting microamp signal that causes the same nuisance lockouts you are trying to fix. The OEM rod restores correct flame immersion and a strong signal. Install difficulty: 1 of 5. Tools: 1/4" nut driver, fine emery cloth or steel wool, and a multimeter that reads microamps. #1 safety warning: turn off the gas supply and kill electrical power before servicing. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG8UAA036111ABJA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.