OEM Carrier Hot Surface Igniter Kit 332505-751 for Model PG8UAA036111AAJA

This OEM hot surface igniter kit is the factory-specified ignition replacement for the Carrier PG8UAA036111AAJA gas furnace. The hot surface igniter is the first component to activate in every heating cycle — the control board energizes it to reach ignition temperature before the gas valve opens. When it fails, the furnace typically attempts ignition one to three times and then locks out, leaving you with no heat. Common symptoms include a furnace that clicks on, runs the inducer, but never produces a flame.

• Specs: 120V hot surface igniter | Includes glow element, wire harness, mounting bracket, and hardware | OEM part number 332505-751 | Also cross-references LH33ZG001
• OEM vs Generic: This is the exact factory-matched kit. Generic igniters frequently use lower-grade silicon carbide elements with inconsistent watt density, leading to premature cracking and repeat failures. The OEM kit includes the factory harness and bracket for a plug-and-play installation with no splicing required.
• Install difficulty: 2/5 — Shut off power and gas before beginning. Tools needed: 1/4" nut driver, needle-nose pliers. Never touch the igniter element with bare hands — skin oils cause hot spots and early failure. Photograph all wiring before disconnecting.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Designed for the Carrier PG8UAA036111AAJA gas furnace. This igniter kit also fits a wide range of Carrier, Bryant, and Payne furnace models sharing the same ignition system. Always verify the OEM part number 332505-751 against your unit's data plate or existing igniter before ordering. Have a question about fitment? Our HVAC parts specialists verify compatibility before you order — reach out today and we'll confirm your part ships the same day.