OEM Carrier Flame Sensor for PG8UAA024065ABJA Gas Package Unit

The flame sensor in your Carrier PG8UAA024065ABJA package unit is a small metal rod that sits in the burner flame and confirms the furnace has actually lit. It works by flame rectification — the flame conducts a tiny DC microamp current that tells the control board it's safe to keep the gas valve open. When the rod gets coated in oxidation or fails, the classic symptom appears: the furnace lights, runs for 3 to 7 seconds, then shuts the flame off and tries again. After a few failed cycles the board goes into lockout and you're left with no heat and a flashing error code. This is a genuine OEM flame sensor with the correct rod length, bend, and ceramic insulator so it sits precisely in the flame path for this burner assembly. A healthy sensor in this furnace should read roughly 1–6 microamps DC of flame current; a weak or dirty rod drops below the board's threshold and triggers shutdown. The rod is made from a heat- and corrosion-resistant alloy designed to survive continuous exposure to flame. Why OEM matters: generic sensors are often the wrong length or angle, so the rod sits too far from the flame and never builds a strong enough signal — causing nuisance lockouts even when the furnace is otherwise healthy. Inferior alloys also oxidize faster, shortening service life. Installation difficulty: 1 of 5. Tools: a 1/4" nut driver, fine steel wool or an emery cloth to clean adjacent contacts, and a multimeter that reads microamps if you want to verify flame current. #1 safety warning: turn off both the gas supply and electrical power at the disconnect before removing the sensor. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PG8UAA024065ABJA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.